Bumbled free#

030 C-grain stock, and the leading and trailing edge spars for both surfaces are cut, tapered as shown.' Supplementary file notesĭid we get something wrong with these details about this plan (especially the datafile)? The double-support bearing also provides a means for adjusting side-thrust to help attain the desired flight circle.Īll wing and canard ribs arc cut from. It is especially important to use a double-support prop bearing and to mount it on a small wedge between it and the motorstick to assure proper down-thrust (see plans). fittings, condenser-paper covering) were obtained from Micro-X Products, PO Box 1063, Lorain, Ohio 44055. These changes were incorporated in the enlarged Paper Stick model and proved quite effective in positioning the CO at the proper location.Ĭonstruction of the Bumbled-Bee is simple and conventional. Even if you have to add a bit of ballast (note the small lump of clay shown at the nose of the prototype Bumbled-Bee in the accompanying close-up pictures), keep the CG at, or forward of, the location shown on the plans! Building the forward canard surface stronger and heavier than might otherwise seem normal, serves the dual purpose of getting both weight and strength at the nose where they are most needed for proper balance and to absorb all the bumping abuse_ To aid in proper CG location, the motorstick dimensions shown in the drawing have been slightly modified from those of the original model shown in the pictures. Which brings us to a few brief words on CG location, before getting into the construction comments. Doing so will give you added motor-winding capacity, as well as helping to keep the CG forward, where we want it. If you plan to fly your Bumbled-Bee only as an Easy-B it would probably be advantageous to increase the motor length an inch or two. Incidentally, the motor length shown on the plans (10 in from prop bearing to rubber hook) conforms to Penny-Plane rules. the design seems to have much yet-to-be realized performance potential. Therefore, built lighter to truly competitive Easy-B weights, or adopted to Penny-Plane surface areas. It has consistently turned in flights of eight and nine minutes under 50- and 65-ft ceilings.

The original Bumbled-Bee, shown in the accompanying photos, weighs in at slightly over 3 grams and has competed effectively in both Easy-B and Pen-ny-Plane events in the Northeast. Stall recovery from bumps and hang-ups also seems to be an improvement over conventional tractor designs.Ĭontest performance to date has been encouraging.

Bumbled free#

This seems to be because the aft CG (compared to conventional designs), combined with the decreasing forward thrust as the rubber motor winds down (remember, in most hang-ups the prop will remain free to turn), tends to induce the model to back-off and free itself.

However, all flight experience to date has indicated that hang-ups really arc fewer, and those which do occur, seldom require anything more than patience for ultimate retrieval. While an original goal was to reduce hang-ups on obstructions by moving the prop aft, the resulting reduction in the forward span has enabled the model to penetrate smaller crevices than would otherwise be possible. The author (past CLCB chairman and present CLCB member) developed the design from a concept initiated by George Myers (writer of the monthly Radio Technique column in Model Aviation), The original fun-fly model evolved into a competitive airplane and we are now experimenting with a larger version of the Burn-bled-Bee in the Indoor Paper Stick event (page 15 of the December 1976 issue of MAN has photos of Barry Pailet with the canard he flew in the Paper Stick event at the 1976 Nationals). But then you ought to expect the collaboration of an RC columnist and a CL Contest Board member to result in an unusual Indoor model! It was originally intended to christen our little Easy-B canard the 'Bass-ackwards,' but in deference to the tender young eyes which may be reading this text we settled for 'Bumbled-Bee.' In either case, the entire project has been a bumbled, bassackwards comedy of contradictions.

Quote: 'An Easy-B canard that consistently has turned in flights of 8 to 9 minutes under 50 to 65-foot ceilings.